top of page

COPPER SERIES

Aidas cartridges

COPPER Durawood Dark S.jpg
COPPER Durawood dark R.jpg

All Copper series cartridges share same construction and electrical properties. Their main difference is body material which is not only esthetical property. As phono cartridge is very sensitive to vibrations, body material plays an important role. Different body dampening properties makes a unique sound.


The Aidas Durawood ( and Durawood Bee)  cartridges have a beautiful, multicolor ( or grey , mixed grey)  Durawood body. Durawood is DIN 7707 compliant and is said to have similar qualities as Panzerholz - one of the strongest and hardest wood composites in existence.​​ Wood composite ( Green ) is the material consisting of wood dust and a special bonding resin. The material is stone hard with high level of chemical and moisture resistance.

Copper Panzerholz R.jpg
COPPER Composite green R.jpg

WOOD COMPOSITE

All copper series cartridges have Namiki boron cantilever with Micro Ridge stylus and pure Copper coil.

Specifications:


Body: Wood composite
Cantilever: Namiki / Adamant boron 
Stylus:  MicroRidge
Output: 0.3mV
Magnet system: AlNiCo5
Tracking force: 1.9g.
Compliance lateral: 8 um/mN
Cartridge weight:  8.8g.
Recommended loading: 100 – 1,000 ohms
Coils: copper 6N 0.03mm
Mount: thread  M2.5x0.45, 1/2 inch / 12.7mm standard between the holes 
Coil impedance DC: 5 ohms 
Recommended tonearm mass: medium.

COPPER BEE MIX R.jpg

DURAWOOD BEE

All copper series cartridges have Namiki boron cantilever with Micro Ridge stylus and pure Copper coil.

Specifications:


Body: Durawood multicolor
Cantilever: Namiki / Adamant boron 
Stylus:  MicroRidge
Output: 0.3mV
Magnet system: AlNiCo5
Tracking force: 1.9g.
Compliance lateral: 8 um/mN
Cartridge weight:  8.8g.
Recommended loading: 100 – 1,000 ohms
Coils: 6N copper 0.03mm
Mount: thread  M2.5x0.45, 1/2 inch / 12.7mm standard between the holes 
Coil impedance DC: 5 ohms 
Recommended tonearm mass: medium.

PANZERHOLZ

All copper series cartridges have Namiki boron cantilever with Micro Ridge stylus and pure Copper coil.

 

Specifications:


Body: Panzerholz
Cantilever: Namiki / Adamant boron 
Stylus:  MicroRidge
Output: 0.3mV
Magnet system: AlNiCo5

Pins: 24kt pressed Gold ( Brass base) 
Tracking force: 1.9g.
Compliance lateral: 8 um/mN
Cartridge weight:  9.8g.
Recommended loading: 100 – 1,000 ohms
Coils: 6N copper 0.03mm
Mount: thread  M2.5x0.45, 1/2 inch / 12.7mm standard between the holes 
Coil impedance DC: 5 ohms 
Recommended tonearm mass: medium.

COPPER Durawood MIX R.jpg

DURAWOOD

All copper series cartridges have Namiki boron cantilever with Micro Ridge stylus and pure Copper coil.

Specifications:


Body: Durawood
Cantilever: Namiki / Adamant boron 
Stylus:  MicroRidge
Output: 0.3mV
Magnet system: AlNiCo5
Tracking force: 1.9g.
Compliance lateral: 8 um/mN
Cartridge weight:  9.5g.
Recommended loading: 100 – 1,000 ohms
Coils: copper 0.03mm
Mount: thread  M2.5x0.45, 1/2 inch / 12.7mm standard between the holes 
Coil impedance DC: 5 ohms 
Recommended tonearm mass: medium.

COPPER Composite green L.jpg

AIDAS CARTRIDGES

Precise. Natural. Exceptional.

ADD A TESTIMONIAL

This is your Testimonials section paragraph. Encourage your site visitors to rate and add a testimonial about their experience with your services.

Would you recommend us to your friends?

Thanks for submitting!

bottom of page